Distortion Fluid

Distortion Fluid by Iczer

"Excuse me, do you know where i can wipe my hands?"

The character has the ability to produce a fine but viscous fluid from the palms of his hands, which he can apply to a solid surface, inanimate object or any other otherwise immobile lifeform.

1) Fluid production: The character can generate one gallon per level per hour of this slime. a gallon, when applied by hand, can cover enough area to cover a 20 foot across section of wall, or a completely cover a human being.

2) Effects of fluid: 15seconds after the character has finished coating a subject (after he removes his hands) the gel like substance begins to set. as the gel sets, it renders the object so coated invisible to the human eye. It also vents and reflects heat making it hard to see with thermal or infra red sensors (though ultraviolet works just fine). After 20 minutes per level of the character the gel hardens and flakes off revealing the object in question.

3) Limits: objects coated with the gel must remain relatively immobile. coating a human being with this gel works just fine, but rapid movement (any combat, or motion faster than spd causes the gel to react to the body and begin to run. Worse, the gel is non porous and mildly toxic, and if the gel gets into a characters eyes, throat, nose or other mucous membranes. Additionally, as the gel reflects absorbs and relflects heat, a human body can suffer serious frostbite from an application.

4) Other effects: The gel is slippery. a half gallon applied to the ground (apart from making the ground resemble a hole) renders that portion of the ground to be extremely hazardous to cross. Anyone moving over that ground must make a balance check (-10% if moving faster than a walk, -20% if movign faster than a jog) Applied with moderation, the character can use small amounts of the gel to act as a coolant for people, or as a coolant/lubricant for engine parts.